WIPO – 检索国际和国家专利汇编

1.9200555AFSLUITINGSAMENSTEL VOOR HOUDERS.

NL - 16.10.1992

国际分类 B65D 43/02 申请号 9200555 申请人 DART IND INC 发明人

2.8500032Automat coping with sachets or other soft packages - has auxiliary rear support tilting when drawer is extended

NL - 01.08.1986

国际分类 G07F 5/02 申请号 8500032 申请人 METAALFAB KRAMAHAN B V 发明人

The packages, e.g. paper ware or textiles, to be purchased are loaded into the machine in a rectangular section tube (5). When the appropriate have been inserted and accepted by the machine, the purchaser pulls the handle (9) on a drawer (4,8,14). The rear wall (14) of the drawer pushes the lowest package (A1) out of the bottom of the tube (5). When the drawer is about one-third of the way out, a slot in an extension of the rear wall starts to pull a pin (18) protruding from an auxiliary rear support (15), pulling the support under the next package (A2). As the drawer is pulled further out, the auxiliary support tilts, lifting the next package upwards to prevent it sliding into the drawer when the first package is removed. Pushing the drawer back in allows the next package to drop and resets the coin mechanism.

3.190335WERKWIJZE VOOR HET BEREIDEN VAN ROETEN.

NL - 16.07.1985

国际分类 C09C 1/50 申请号 8403906 申请人 CABOT CORP 发明人

4.8502438WERKWIJZE VOOR HET IN BOEKVORM INBINDEN VAN EEN AANTAL VELLEN.

NL - 02.12.1985

国际分类 B42C 9/00 申请号 8502438 申请人 GEN BINDING CORP 发明人

5.8502453Producing mould to mfr. fibre reinforced plastic ships hull - by building mould wall from foam plastic blocks in rectangular container, machining cavity contour, and opt. lining cavity wall

NL - 01.04.1987

国际分类 B29C 33/30 申请号 8502453 申请人 GIESSEN DE NOORD MARINEBOUW B 发明人

The method is for producing a mould for the mfr. of a buoyant body, e.g. a ship or boat, from setting material, e.g. fibre-reinforced plastics, where the contour of the mould cavity corresponds with that of the outer hull surface. It comprises filling a container with side and end walls and a bottom with settable foam material and forming the cavity in it. The filling is pref. built-up from blocks of already set foam leaving a space which is smaller than the required cavity, this cavity then being produced by a rotary cutting operation or with a heated cutting blade. The cavity wall may be lined with a material compatible with the plastic used to form the hull.

6.8502470VERRIJDBARE INRICHTING VOOR HET UITVOEREN VAN WERKZAAMHEDEN ZOWEL BOVEN ALS ONDER WATER.

NL - 01.04.1987

国际分类 E02F 3/88 申请号 8502470 申请人 JACOBUS MARIA JOSEF HOFLAND 发明人

7.8502598Agricultural granular material spreading machine - has hopper supporting arms on vertical frame section also carrying drive motor

NL - 02.01.1986

国际分类 A01C 17/00 申请号 8502598 申请人 LELY NV C VAN DER 发明人

The spreader for granular or powdery material, has a frame containing a hopper from which two or more rotary distributors on vertical axes discharge the material. The frame has a rectangular vertical section on one side, from which supporting arms (10) for the hopper extend. There can be supporting beams at right angles to this section and below the arms, for the drive mechanism to the tools. In plan view, the beams can be mounted in a V-pattern with their ends fixed to vertical frame members.

8.8502642RASTER-BEELD-PROCESSOR.

NL - 01.04.1986

国际分类 H04N 1/387 申请号 8502642 申请人 OCE NEDERLAND BV 发明人

9.8502709MAGNETISCHE BAND.

NL - 01.05.1986

国际分类 C09D 5/23 申请号 8502709 申请人 FUJI PHOTO FILM CO LTD 发明人

10.8502734WEERGAVEPANEEL MET EEN GASONTLADING EN WERKWIJZE OM DIT TE VERVAARDIGEN.

NL - 02.01.1986

国际分类 H01J 17/49 申请号 8502734 申请人 OWENS ILLINOIS INC 发明人

1 / 23,313

转到检索输入栏	`CTRL` + `SHIFT` +
转到结果（选定结果）	`CTRL` + `SHIFT` +
转到详细信息（选定标签）	`CTRL` + `SHIFT` +
转到下一页	`CTRL` +
转到上一页	`CTRL` +

转到下一个结果/图像	/
转到上一个结果/图像	/
向上滚动	`Page Up`
向下滚动	`Page Down`
滚动至顶部	`CTRL` + `Home`
滚动至底部	`CTRL` + `End`

正在处理

进入国家阶段

规范文件

设置

反馈

查看申请

保存查询

查询树

优化选项

完整查询

并排视图快捷键

分析

转到下一个标签
转到上一个标签