OMPI – Recherche dans les collections de brevets nationales et internationales

1.52877REGULATOR OF STORAGE BATTERY CHARGING FROM PHOTOVOLTAIC MODULES

RS - 29.02.2012

CIB G05B 13/00 N° de demande 20100044 Déposant NIKOLIC ZORAN DR Inventeur NIKOLIC ZORAN DR VISI NAUCNI SAVETNIK

Invention herewith described refers to the process of making a photovoltaic power supply voltage regulator with higher efficiency ratio than the existing ones.The existing photovoltaic power supply voltage regulators and battery charge through the photovoltaic module regulators use the average point of the natural U/I curve of the photovoltaic modules and voltage characteristics of batteries. Recharging batteries is firstly performed with constant voltage with a maximum current that the photovoltaic modules can provide, but after achieving the maximum charging voltage the current drops to lower values. In the process, the stationary operating point of photovoltaic PV modules is used, which is below the maximum value of the efficiency ratio. The efficient photovoltaic power supply voltage regulator uses the working principle of dc voltage regulator (chopper) and recharges the battery on the same principle as the battery charging the conventional regulator but with the current that is about 20 per cent or more higher than the current obtained by battery charging the conventional regulator.This device should be used on the same points of applications as the conventional charging regulators and thus with the same conditions of application, the accumulated power will be increased for 20 percent or more.This electronic device is of simple design and the quality is achieved by selecting the components of the appropriate quality.

2.52996PROCEDURE FOR MANUFACTURE OF THE BUILDING ELEMENT FOR MAKING WALLS, FLOORS, CEILINGS AND TOMB COVERINGS

RS - 31.12.2010

CIB E04C 1/00 N° de demande 20100115 Déposant ŽIVKOVIĆ SLOBODAN Inventeur ŽIVKOVIĆ SLOBODAN

Invention herewith described refers to the styrodur reinforced plate comprising the styrodur plate (1) wherein is embedded wire (2, 3) reinforcement and affixed with adhesive (4). Around the styrodur plate (1), around all six sides is applied a layer (5) of adhesive. Over the layer (5) of adhesive on the joints (11) of the top and all lateral sides is glued the angular reinforcement (6). Over the layer (5) of adhesive and the angular reinforcement (6) is placed and glued with a layer (7) of adhesive the PVC net (8). Another layer (9) of adhesive is on all these applied as a finishing layer. If it is necessary to decorate the plate, the decorative layer (10) of adhesive is applied on the finishing layer (9) of adhesive. In this way, the styrodur reinforced plate gets good insulating properties and strength so it can be used instead of granite slabs for tombstones and as replacement for other plates which are heavier and more expensive when applied to the floors, walls and ceilings.

3.20100166PROTON AND ELECTRON LINEAR TRANSISTOR CIRCUITS

RS - 30.06.2012

CIB H99Z 99/00 N° de demande 20100166 Déposant DELJANIN SLOBODAN Inventeur

Invention herewith described refers to the equivalence based on the maintenance of the linear left (U1) electro magnetic potentials and the right (U11) electro magnetic potentials and creates the linear electricity and develops the same power.From the physical essence of the electricity and the left (U1) (US) (MP) (MM) branch of the potential and the right, (U11) (US) (MP) (MM) branch of the potential result that the total amount of the left branch electricity carrier (U1) (US) (MP) (MM) of the linear potential and the right one.The linear potential branches (U11) (US) (MP) (MM) that touch the left (U1) oriented node and the right (U11) oriented node (UL1), during some period of time the equal amount of electricity carriers of the linear potential left and right branches which from the node flow out for the same time, if they have the reversible branch, the system is self-sustaining.They are permutated, the plus (+) is on the left (U1) in the left electromagnetic spiral and the minus (-) is on the right (UL1) in the right magnetic spiral.

4.52969SOAP WITH CRYSTALS AND THE PROCEDURE FOR OBTAINING THEREOF

RS - 31.12.2011

CIB C11D 9/02 N° de demande 20100226 Déposant PANAJOTOVIĆ DANIJELA Inventeur PANAJOTOVIĆ DANIJELA

Invention herewith described refers to the soap with crystals and the procedure for its obtaining. The procedure of the crystal use is applied to the new formula for soap making using cold saponification process, resulting in soap with the synergistic effects of mixtures of vegetable oils in proper proportions and crystals. The used crystals are the insoluble quartz varieties. The new soap cleans, nourishes the skin and enhances microcirculation at the same time, and due to the presence of crystals, it has a massaging effect.

5.53628SPACESHIP LAUNCHING AND LANDING SYSTEM

RS - 31.12.2011

CIB B64G 5/00 N° de demande 20100284 Déposant POPOV ZDRAVKO Inventeur POPOV ZDRAVKO

Invention herewith described refers to the spaceship launching and landing system consisting of the launch tube (2.0), starting from the surface of the Planet into its depth, a sufficient number of air tanks (3) placed along the tube (2.0), then corresponding compressors and their valves (4), which are connected with it, then gravity core (12), winding (13), which are located in the central part, then the permanent magnetic gravitational mass attached to the ship at the time of launching, then the slider (8 ) mounted on the launch tube (2.0) and is located closer to the surface of the Planet, with the tank (9) and valves (10 and 11) for the tube (2.0) air supply directly in front of and behind the slider (7), and the controls for opening the valves (4) of the tank (3) are synchronously associated with the position of the moving ship, while the output of the launch tube has a slider closing with valves (10 and 11) for the launch tube (2.0) air supply placed in front of and behind the slider (7), as well as mutually connected controls according to the position of the moving spaceship in the launch tube (2.0).

6.52865PHENYL-PIPERAZINE DERIVATIVES AS SEROTONIN REUPTAKE INHIBITORS

RS - 31.10.2012

CIB C07D 211/20 N° de demande 15812 Déposant LUNDBECK & CO AS H Inventeur BANG-ANDERSEN BENNY

Invention herewith described refers to the phenyl-piperazine derivatives as serotonin reuptake inhibitors and provides compounds represented by the general formula I wherein the substituents are defined in the application. The compounds are useful in the treatment of affective disorders including depression, anxiety disorders including generalized anxiety disorder or a panic disorder and the obsessive compulsive disorder

7.54159HYBRID SIGNAL-TELECOMMUNICATION FIBRE OPTIC CABLE

RS - 28.06.2013

CIB H01B 11/00 N° de demande 20120492 Déposant ŠĆEPANOVIĆ VELIMIR Inventeur ŠĆEPANOVIĆ VELIMIR

Invention herewith described refers to the hybrid signal-telecommunication fibre optic cable (STFK) containing the core which consists of the micro tubes (8) made of tough polyethylene and the star quad (5) the copper pairs of which can be used for transmitting discrete, low-frequency and broadband DSL signals. The application of hybrid cables STFK with DSL pairs (sector-pair core) or with DSL pairs within the star quad (5) and the optical cables (9) with single mode optical fibres 9/125 mu laid in the micro tube (8) of HDPE in one cable integrates two media for the transmission of the information carrier signal. Laying of the fibre optic cable (9) in the micro tube is performed upon laying the cable in the cable canalization or directly in the ground.

8.20130540MECHANISM FOR PRESSING PLASTIC PACKAGING USING TWO FIXED AXLES AND SLIDER

RS - 31.08.2015

CIB B30B 1/02 N° de demande 20130540 Déposant KALIČANIN MARKO PR SOLAGRO TEAM Inventeur JANIĆ NEMANJA

Invention herewith described refers to the mechanism for pressing plastic packaging using two fixed axles and a slider. The mechanism for pressing PET packaging can be used in two different ways: as the wall mechanism or as a built-in mechanism (it could be built in different types of collectors for the compressed plastic packaging: cubic or square, made of sheet metal or crimped wire mesh). The process of pressing is brand new and refers to the pressing of plastic packaging where in the process of pressing the packaging is drilled and pressed. These two separate processes are performed in one pressing procedure, and allow the pressing of a plastic bottle regardless of whether or not there is a cap (whether the same is screwed or unscrewed), or some liquid. The bottle is compressed transversely, and drilled in its central part, then it falls into the collector and remains pressed. In the pressing process, the punching (drilling) is very important to ensure the release of "entrapped" air or liquid, and thus eliminating the conditionality of the slight unscrewing the cap whenever necessary. The mechanism for pressing consists of a handle (2) which is through the cam (4) connected with the slider (3) containing the pins located in the frame with the guides (1). At the bottom of the frame with the guides (1) there are firmly connected two axles (5a, 5b) inserted between the bearings for PET packaging (6a, 6b) and between them, there runs the slider (3) with the pins.

9.49707APPLICATION OF A POLYPEPTIDE ANALOG OF PARATHYROID HORMONE RELATED PEPTIDE (PTHRP) AND SALTS THEREOF FOR THE PREPARATION OF A MEDICAMENT FOR THE TREATMENT OF BONE HEALING

RS - 31.12.2007

CIB A61K 38/22 N° de demande 12700 Déposant HOFFMANN LA ROCHE Inventeur VICKERY BRIAN HENRY

Primena polipeptidnog analoga peptida srodnog paratireoidnom hormonu (PTHrP) i njihovih soli, pri čemu su amino kiseline na pozicijama 22-31 naznačenog PTHrP analoga u formi amfipatičnog α-heliksa Glu Leu Leu Glu Xaa Leu Leu Glu Lys Leu, gde je Xaa neki pozitivno naelektrisani amino kiselinski ostatak, za pripremu medikamenata za zaceljivanje kostiju i srastanje preloma. Prijava sadrži još 8 zavisnih patentnih zahteva.

10.56125METHOD OF DEFINING AND CONTROLLING LIGHTING SCENES

RS - 31.10.2014

CIB H05B 37/02 N° de demande 20140279 Déposant RT-RK D O O Inventeur EREMIĆ PREDRAG

The method of defining and controlling the lighting scene of lighting source (103) in the presence of a wireless communication network, which is based on triggering the events (307) on the main key (201) of scene controller (101) performing control of lighting scenes by selecting the existing lighting scene in step (311) sending the message to include the scene lighting and creation of new lighting scenes on scene controller (101) by sending a request to all switches (102) for controlling the light output of the involvement of each switch (102) for controlling the light output in all lighting set scenes and in step (403) response analysis based on the responses received from the switch (102) for controlling the light output is determined by the first available identifier scene that is not busy and the stage (406) to store identifiers scene, the scene controller (101) sends the message to switch (102) for controlling the light output to save the current state of the scene identifier specified in step (403) response analysis.

1 / 1 944

Aller à l'entrée de recherche	`CTRL` + `SHIFT` +
Aller aux résultats (entrée sélectionnée)	`CTRL` + `SHIFT` +
Aller au détail (onglet sélectionné)	`CTRL` + `SHIFT` +
Aller à la page suivante	`CTRL` +
Aller à la page précédente	`CTRL` +

Aller à l'entrée / image suivante	/
Aller à l'entrée / image précédente	/
Faire défiler vers le haut	`Page Up`
Faire défiler vers le bas	`Page Down`
Faire défiler jusqu'au haut de la page	`CTRL` + `Home`
Faites défiler jusqu'au bas de la page	`CTRL` + `End`

Traitement en cours

Entrées en phase nationale

Fichier d'autorité

Paramétrages

Commentaires

Aller à Demande

Enregistrer la requête

Arbre de requête

Affiner les options

Requête complète

Raccourcis en vue côte à côte

Analyse

Aller à l'onglet suivant
Aller à l'onglet précédent