Please wait...



Goto Application


Note: Text based on automatic Optical Character Recognition processes. Please use the PDF version for legal matters

[ EN ]

Due to their desirable physical properties such as strength and toughness (i.e., the combination of elongation and impact strength), rubber-reinforced polymer resins are employed in a variety of commercial applications. A deficiency of rubber-reinforced plastic materials made from these resins is their vulnerability to environmental conditions, which causes yellowing of the plastic. In certain applications exposure to a light source having as a component ultraviolet (UV) light, e.g., sunlight or fluorescent lighting, can detract from the appearance of plastic parts by causing discoloration of the resin surface, which is commonly referred to as weathering.

Yellowing of rubber-toughened plastic is particularly critical in markets such as business machine housings and parts. The conversion from metals to plastics has resulted in rubber-reinforced plastic components such as business machine housings, which are vulnerable to the degradative effects of fluorescent lighting and sunlight.

The UV stability of thermoplastic business machine housings is receiving close scrutiny from suppliers of multiple component personal computer systems. By using a resin having good UV stability, a manufacturer is assured that the housing of any
peripheral component, e.g., a printer or additional disc drive, added at a later date will match the color of the housing of the original equipment. Consistent color among different business machine housings gives the consumer a strong perception of quality.

Interest in UV stability is also being fueled by pressures to make every aspect of business machines as cost effective as possible. In many cases, this is necessitating a switch from the use of structural foam with a highly UV-stable coating to the use of injection molded, housings with integral color for equipment housings.

Before UV can cause any harm, it must first be absorbed. Only certain groups within polymer
molecules, called chromophores, accept the energy of the UV light and are transformed into excited state groups. These groups then dispose of the energy. The energy may be transferred to a nearby stabilizer molecule called a quencher, which in turn converts the energy to heat or, less desirably, may break weak chemical bonds with minimal color change.

Limited stabilization can be achieved by several conventional mechanisms. UV absorbers operate largely by competitive absorption. Absorbers convert the absorbed energy into harmless heat. Thus, much less light reaches chromophores in the substrate.

An ideal UV absorber should be extremely photostable and have high absorption over the entire UV range from 290 to 400 nanometers (nm).

The 2-hydroxyphenyl benzotriazoles are one class of UV absorbers. The benzophenones are another important and widely used class of UV absorbers whose absorption covers mainly the lower half of the UV range. Products of this latter class tend to be more prone to yellowing under processing or light exposure conditions than 2-hydroxyphenyl benzotriazoles. A third class of UV absorbers include rutile TiO2 metal oxides such as pigment grade titanium dioxide. The benefits of TiO2 are believed to be more than just as a

UV absorber. Higher TiO2 concentration in a resin increases the sample opacity thereby hindering the observation of discoloration deeper within the

Other classes of UV absorbers, which absorb primarily at the low wavelength end of the UV range, include salicylates, cyanoacrylates, benzylidene, malonates, and oxalarrilides. These are generally less effective than UV absorbers in the first three classes.

Hindered amine light stabilizers (HALS) provide another approach to UV stabilization. These molecules, typically derivatives of tetramethylpiperidines, do not absorb UV light, but are effective scavengers of free radicals, thus acting as photooxidation inhibitors. Synergistic enhancement of stabilizing activity is often achieved by simultaneous use of scavengers and stabilizers, which each act by different mechanisms. When choosing a plastic composition, end users in the past have had to make significant expenditures to achieve ultraviolet light stabilization, or accept an inevitable amount of discoloration. Improved
stabilization has been achieved using a combination of TiO2 and a HALS additive. However, due to the cost of the HALS additive, this stabilization combination entails significant expense.

As previously mentioned, quenchers interact with excited states of chromophores to accept the energy transferred and to return the excited
chromophore to the stable ground state. Typical quenchers are nickel chelates which can accept energy from excited chromophores. In addition, some of the protective action of this class has been attributed to their hydroperoxide decomposing and radical scavenging ability.

In view of the problems in achieving color stabilization of rubber-reinforced resins, it remains highly desirable to provide an inexpensive additive for rubber resins which minimizes an overall color shift upon exposure of the resin composition to UV light.

The present invention provides a composition comprising a rubber-reinforced plastic containing a flame retardant additive, wherein the composition contains 0.001 to 0.1 weight percent of a yellow color balancer, said color balancer being an organic dye or pigment and being effective to reduce the overall color shift ΔE of the plastic upon exposure to ultraviolet light.

The invention also provides a method of reducing the overall color shift, ΔE, of a rubber- reinforced plastic composition containing a flame retardant additive upon exposure to ultraviolet light, said method comprising incorporating into the
composition a fadeable, yellow color balancer, said color balancer being an organic dye or pigment and being present in an amount of 0.001 to 0.1 weight percent.

Certain fadeable, yellow organic dyes and pigments have been used to color resins, said dyes and pigments would be used in substantially greater amounts than 0.1 weight percent to color rubber-reinforced plastic compositions.

Rubber-containing thermoplastics are well known to those in the art and reference is made thereto for the purposes of this invention. Exemplary resins are those toughened plastics manufactured by bulk solution, bulk-suspension or emulsion polymerization, and thermoplastics to which rubber has been blended. Representative thermoplastic materials include polymeric resins derived from one or more monovinylidene aromatic compounds such as styrene and, optionally, one or more monomers copolymerizable therewith, such as an
ethylenically unsaturated nitrile. Exemplary rubber-reinforced polymers of this type include high impact polystyrene ("HIPS") and ABS type resins.

In preparing a copolymer matrix, the amounts of the monovinylidene aromatic compound and comonomer most advantageously employed will vary depending on the physical and chemical properties desired in the final rubber-reinforced product. In general, the copolymer matrix will advantageously comprise from 5 to 35, preferably 15 to 25 weight percent of the comonomer and from 95 to 65, preferably from 85 to 75 weight percent of the monovinylidene aromatic monomer, said weight percents being based on total polymer weight.

Rubbers useful in preparing rubber-reinforced polymer resins are well-known in the art and reference is made thereto for the purposes of the present
invention. Advantageously, the rubber employed in preparing said rubber-reinforced product is a homo-polymer or a copolymer of an alkadiene which exhibits a second order transition temperature not higher than 0°C and preferably not higher than -20°C as determined by conventional methods, e.g., ASTM Test Method D-746-52T. A copolymer of ethylene, propylene and optionally, a nonconjugated diene, or an acrylate rubber can also be employed. Preferably, the rubber is a homopolymer of a 1,3-conjugated diene such as butadiene, isoprene, piperylene, chloroprene or a random block or graft copolymer of said conjugated dienes with one or more comonomers. Suitable comonomers include monovinylidene aromatic compounds such as styrene; α-ethylenically unsaturated nitriles such as acrylαnitrile; or α-olefins such as ethylene or propylene. Although the rubber may contain a small amount of crosslinking agent, excessive crosslinking can result in the loss of the rubbery characteristics of the rubber.

Preferred rubbery polymers are the homopolymers of 1 ,3-butadiene and block or graft copolymers of at least 55, more preferably from 65 to 85, weight percent 1,3-butadiene, and up to 45, more preferably from 15 to 35, weight percent of a monovinylidene aromatic
compound, preferably styrene. The rubber is
advantageously employed in an amount such that the rubber-reinforced product contains from 3 to 20 weight percent rubber. A rubber-reinforced product having from 5 to 15 weight percent rubber, based on the total weight of the rubber-reinforced polymer, is preferred.

Techniques suitable for producing the
interpolymer of the matrix are well-known in the art. Examples of the known polymerization processes include mass, mass-suspension, mass-solution, suspension, and emulsion polymerization processes as well as other modifications and/or combinations of such processes. See, for example, U.S. Patents 3,509,237; 3,928,494; 4,221,883; 4,239,863; 4,243,765; and 4,250,271.

The bulk and emulsion polymerization processes used for incorporating rubbers into styrene-based polymers are not easily adapted for incorporating rubbers into other polymer systems. Direct blending of a rubber with a thermoplastic polymer is another method for incorporating rubbers into thermoplastic polymers. The standard practice is to prepare the resin
separately and to add the rubber later. Additionally, grafted rubber concentrate (GRC), i.e., agglomerated particles of emulsion graft polymerized rubbers, may be compounded with bulk and emulsion prepared compositions and utilized as an impact modifier.

For example, polyvinyl chloride (PVC) may be blended with poly(butadiene-co-acrylonitrile),
chlorinated polyethylene, grafted ethylene-vinyl acetate (EVA) copolymer, and grafted ethylene-propylene rubber (EPR). Ethylene-propylene diene monomer (EPDM) and EPR can be mechanically blended with polypropylene. Toughening agents may also be made by making a
masterbatch of rubber and grafted thermoplastic
terpolymer such as acrylonitrile-butadiene-styrene (ABS) or methacrylatebutadiene-styrene (MBS).

Plastic materials can be modified by a variety of substances (flame retardant (FR) additives) designed to inhibit ignition or burning characteristics to conform to prescribed standards. This is especially significant in business machine housings. Applicants have found several FR additives add to the
discoloration of rubber toughened plastics upon
exposure to light having as a component ultraviolet light.

FR additives may interrupt or inhibit one or more of the mechanisms of burning or smoke generation. Some are present as fillers while reactive varieties are introduced into the resin system by chemical reaction. They act by reducing the amount of
combustible materials in the product or by interfering chemically with the combustion process either in the vapor or condensed phases.

Among the more common additive-type flame retardants are the halogenated aliphatics, brominated aromatics, halogenated and nonhalogenated
organophosphates, and the oxides of aluminum and antimony.

Brominated aromatic compounds are commonly used FR additives for many thermoplastic resins, especially styrenics and polyesters.

Applicants have found that a number of commonly incorporated FR additives increase discoloration of the rubber toughened plastics upon exposure to ultraviolet light. Exemplary of these FR additives are
decabromodiphenyl ether, bis(tetrabromophthalimido)- ethane, poly(dibromophenylene oxide), tribromophenoxy- ethane and 1,2-bis(pentabromophenoxy) ethane.

Antimony oxide is unique in that its only value as a flame retardant is in combination with halogen compounds as a synergist. A preferred FR additive comprises 1,2-bis(pentabromophenoxy) ethane and
antimony trioxide.

Included in the broad category of FR additives are smoke suppressants. Examples are oxides of boron and molybdenum which are commonly incorporated in PVC.

By "color balancers" is meant any yellow organic dye or yellow organic pigment that will fade upon exposure to light having as a component
ultraviolet light. The color balancer may be added to the resin as part of a pre-matched color system or as part of the initial color system. The color balancer may be incorporated into the resin in any conventional manner known to those skilled in the art. Exemplary of such techniques is to mix the resin and the color balancer in an extruder.

The color balancer chosen should be evaluated on the basis of the UV stability of the end product. It does not make lightfast the rubber-reinforced plastic. Rather, the initial yellow of the color balancer fades to generally compensate for the yellowing of the rubber toughened plastic. Consequently, the plastic is not made UV stable, but its overall color shift will be greatly reduced because of the presence of color balancer. The relative amount of color balancer, e.g., dye or pigment, will be dependent on a variety of factors. Such factors include the stability of the dye; the amount of rubber and FR additive in the plastic; and whether the color balancer is included in the initial custom color package, which requires a higher weight percentage than if added to a "prematched" system.

Although any yellow organic dye which fades upon exposure to UV light is a suitable color balancer, anthraquinone dyes have now been found to balance resins very well. Anthraquinone dyes are inherently UV unstable, gradually losing yellow intensity upon exposure.

Exemplary anthraquinone dyes are Yellow AGB obtainable from Amaplast Co., and Soluaperm Yellow Gand Solvent Yellow 77 obtainable from the Ferro Compounding Co. A particularly preferred color balancer, 1,8-bis(phenylthio)anthraquinone, is obtainable as Yellow GHS from the Amaplast Chemical Co.

Another particularly preferred color balancer is Macroflex Fl. Y. 10GN, a cumarin dye, obtainable from the Mobay Chemical Company.

Organic dyes may be present in an amount of from 0.001 to 0.04, preferably from 0.001 to 0.02 weight percent of the rubber-toughened plastic.

Also, suitable as color balancers are yellow organic pigments. Unlike dyes, pigments are generaaly insoluble and impart color by dispersing throughout the system.

Selection of a pigment should be based on properties known to those in the art. Exemplary of such properties are UV stability, hue, tinting
strength, hiding power and melt flow. One suitable organic pigment is Fanchon Yellow, obtainable from the Mobay Chemical Company.

Organic pigments usually will be present in an amount of from 0.001 to 0.1; preferably from 0.001 to 0.05; and most preferably from 0.03 to 0.05 weight percent of the rubber-toughened plastic.

Liquid colorants are dispersions of pigments in a carrier matrix. Carriers for liquid colorants are blends of surfactants, plasticizers, and other
ingredients. Migration or bleed is a function of the pigment showing varying degrees of solubility in the plastic br other substance in contact with the colored plastic. Higher-molecular-weight pigments minimize migration problems.

For the purposes of this invention, a suitable color concentrate is a composition containing a
predetermined percent by weight of color balancer, i.e., organic dye or pigment properly dispersed in a carrier resin. The carrier resin is then blended into a letdown resin, which is colored or modified. The amount of color balancer incorporated into a
concentrate can vary greatly, reaching as high as 80 percent or more. The weight of color balancer used per weight of letdown resin is called the letdown ratio, which is expressed as unit weight of letdown resin to unit weight of concentrate. Although letdown ratios as high as 200:1 are possible, the best color uniformity is obtained with lower ratios, approximately 50:1 or less.

Color concentrates usually are mixed with the letdown resin by gravimetric proportional feeders at the extruder hopper. Since the letdown ratio is calculated upon a percent-by-weight basis, the same method must be used to determine the proportion of concentrate and natural resin in the mix. In this way, color uniformity will be assured from run to run.

To determine the proper letdown ratio by percent of color balancer in the mix, the following formula is used:

% Color balancer/in Concentrate -1
% Color balancer/in Final Part

The carrier resin contained in the concentrate should be generally the same as or compatible with the letdown resin at the letdown ratios employed. Testing prior to actual application will help determine whether changes in the physical properties of the final product will occur. In general, it is most effective to have a homogeneous distribution of color balancer; this is accomplished by a carrier resin with a melting point slightly lower than the melting point of the letdown resin.

The color balancer may be added singly or in combination with commonly incorporated UV stabilizers. A particularly preferred combination is to incorporate a color balancer and up to 10 percent by weight of TiO2 in the rubber toughened plastic.

Color shift is the discoloration or change in hue of a plastic exposed to UV radiation. Color shift can be measured by a color variation parameter, delta E (ΔE). Essentially this parameter is a measure of the color difference between an experimental sample and a control sample of the same formulation. Hunter color scales for grayness (L), red/green (a), and yellow/blue (b) are described by K. S. Hunter in "Photoelectric Color Difference", Journal of the Optical Society of America, JOSAA, Vol. 12, No. 12, December, 1958, pp. 985-995. Delta E, the total color variation, is calculated by the following formula:
ΔE = (L-Lo)2 + (-a-ao)2 + (b-bo)2

where L, a, and b are the color values of the UV exposed experimental sample and Lo, ao, and bo are color values of an unexposed control sample stored in a dark environment, creating initial delta values of zero. Lower ΔE values mean less variation from the control sample values and less discoloration.

Delta E, however, gives no indication as to how the color is shifting. Therefore, additional
parameters for measuring color change include L, a or b versus exposure time.

Weatherometers subject samples to accelerated weathering conditions. Various weatherometers are commercially available to evaluate the ultraviolet stability of rubber-reinforced plastics as measured by ΔE.

One suitable weatherometer is the Xenon Arc Ci65 Weatherometer (Xenon Arc), available from the Atlas Electrical Devices Company. This weatherometer utilizes a boro-silicate inner filter and a soda lime glass outer filter; an irradiance output of 0.35 watts per square meter; and a temperature of 55°C. Subjecting a plastic resin to an exposure time of 300 hours at a continual 1.0 revolutions per minute (RPM) in the Xenon Arc Ci65 Weatherometer is designed to simulate
approximately 5-7 years of "typical indoor UV
exposure". An exposure time of 100 hours is often sufficient to test the commercial acceptability of rubber-reinforced plastic compositions. Preferably, the compositions of the invention have an overall color shift of less than 2.0 ΔE after 100 hours and
advantageously less than 1.0 ΔE after 300 hours.

Another suitable weatherometer is the HPUV

Indoor Actinic Exposure System (HPUV), also available from the Atlas Electric Devices Company. This
weatherometer utilizes eleven 1500 MA cool white fluorescent lamps and two filtered 430 MA fluorescent sunlamps. Subjecting a plastic resin to an exposure time of 300-400 hours in the HPUV Indoor Actinic
Exposure System is designed to simulate 3-5 years of "typical" indoor UV exposure. An exposure time of 100 hours in the HPUV Actinic Exposure System is often sufficient to test the commercial acceptability of rubber-reinforced plastic compositions. Preferably, the compositions of the invention have an overall color shift of less than 2.0 ΔE after 100 hours and
advantageously less than 1.0 ΔE after 300 hours.

Because of the different weathering methods used in weatherometers, e.g., the Xenon Arc as compared with the HPUV, assessment of the UV stability of a rubber-reinforced plastic is highly dependent on the type of weatherometer utilized. An acceptable delta E recorded in one weatherometer does not ensure a
similarly acceptable delta E being recorded in a weatherometer employing a different weathering method.

The following examples are presented for the purpose of illustration only. The features and
advantages of the present invention are not limited to these examples. All parts and percentages are by weight unless otherwise indicated.

Examples 1 -4

An ABS resin prepared by mass polymerization is available as 342EZ (Trademark of The Dow Chemical Company) from The Dow Chemical Company. 342EZ is 56.5 percent of the rubber-modified plastic comprising a continuous polymer phase consisting of 68.75 percent styrene, and 20.5 percent acrylonitrile; dispersed throughout the polymer matrix is polybutadiene in an amount of 9.25 percent.

By emulsion polymerization, a grafted rubber concentrate (GRC) is prepared having a composition of 41.6 percent styrene, 41.0 percent butadiene, 16.7 acrylonitrile. The GRC, used as an impact modifier, comprises 5 percent of the rubber-modified plastic.

A colorant, sold under the tradename of IBM Pearl White by the Ferro Compounding Co., is
incorporated in the composition. The colorant is 4.8 percent of the composition, and it was let down at a 20: 1 ratio.

Titanium dioxide is added to composition in a 6 percent concentration.

With the ABS, GRC, and colorant are mixed and melt blended the following additives: chlorinated polyethylene fire-resistant additive and synergist, additional stabilizers and lubricants.

Various concentrations of a color balancer, Yellow GHS, is melt blended in an 8.8 twin extruder. The color balancer is added after the color
concentrate. A double pass, with tumble blending prior to both the initial and final pass, is utilized to enhance dispersion. A temperature profile of 165°C at the feed end and 204°C at the dye end is utilized.

Pelletized formulations are dried for two hours at approximately 165°C prior to sample molding. 2 x 3.5 x 0.11 inch (5 x 8.9 x 0.28 cm) plaques are molded on a Negri-Bossi injection molder. The barrel temperature profile used is 210°C at the feed end and 218°C at the dye end.

Moldings having various levels of Yellow GHS are evaluated for color variation using a reflectance spectrophotometer and the aforementioned Hunter color scales.

Early in the test, an initial bleaching of the sample is ordinarily observed (shown by a negative ΔB). After this phenomena, the sample yellowing begins.
Delta E is used to monitor the overall color shift.
Further, since the main discoloration resulting from UV exposure is in the yellow hue, or the blue/yellow scale, ΔB is monitored. Finally, yellowing is found to occur quite linearly with time, therefore, slopes of ΔB versus time (following the initial bleaching) were measured for comparison of various systems' behavior.

The results of the color variation parameter for moldings of various percent GHS based on the total weight of material are set forth in Table 1.

As seen by the results in Table I, improved weathering as determined by ΔE and ΔB is achieved by the color balancer, in the form of a yellow organic dye, in an amount below 0.04 percent.

Examples 5-7

Using the techniques of Example 1, an identical fire-retardant, colored, rubber-modified plastic material is prepared, except that Applicants employed various concentrations of NCR Gray concentrate, a colorant obtained from the Reed Chemical Company.

As seen by the results in Table II, improved weathering as determined by ΔE and ΔB is achieved by the addition of a color balancer, in accordance with the teachings of this invention.

Examples 8-10

Using the technique of Example 1, an identical fire-retardant, colored rubber-modified plastic material is prepared except that Applicants employed various concentrations of IBM Shell Gray concentrate, a colorant obtained from the Ferro Compounding Company.

(1)Same as Footnote 1 in Table I.
As seen by the results in Table III, improved weathering as determined by ΔE and ΔB is achieved by the addition of a color balancer in accordance with the teachings of this invention.

Examples 11-12

Using the techniques of Example 1 , an identical fire-retardant, colored, rubber-modified plastic is prepared except that Applicants employed, in the original dry blend color match, various concentrations of IBM Pearl White, a colorant available from the Reed Chemical Company.

As seen by the results in Table IV, improved weathering as determined by ΔE and ΔB is achieved by the addition of a color balancer, a yellow organic dye, in the original color package.